Home Adapters ValueCAN 3 (2x Dual Wire CAN [ISO 11898-3])
vcan-dw3-2
  • ValueCAN 3
  • ValueCAN 3
  • ValueCAN 3 (2x Dual Wire CAN [ISO 11898-3])

    $395.00

    • Windows XP / Vista / 7 / 8.X / 10 and Linux
    • ISO11898 dual wire CAN Physical Layer (TJA1040x2) compatible with Device Net and
      CANOpen
    • J2534 Compliant for CAN and ISO15765
    • RP1210 Compliant for CAN and J1939
    • CCP Protocol Hardware acceleration
    • Supports listen-only operations
    • Double Buffered CAN transmission
    • Industry Standard 9-PIN D-Sub Connector Pin out
    • Integrated 1 Meter USB Cable
    • Transient and Reverse battery protected
    • Green and Red LEDs indicate transmission or
      reception of USB data.
    • LED indicates transceiver power.
    • Operational Temperature Range: -40° C to +70°C
    • Fully USB powered with option for external power
    • 6-40V VDC compatible with 24V industrial systems.
    • Isolated Transceiver Side Power Consumption
      (typical): 15mA @ 14.4 VDC (maximum during bus
      fault) 100mA @ 14.4 VDC
    • On board Processing: 40 MIPS RISC based design
    • 64 bit time stamping to an accuracy of 500 nanoseconds
      for one channel, 5 microseconds for two
      channel usage. Time stamp never overflows.
    • Firmware: Field upgradeable design (flash
      EEPROM)
    • Vehicle Spy Trial Setup Tool for Baud Rates
    • Graphical Bit Timing Tool
    • Warranty: One year limited warranty
    • Physical Dimensions: 45″ (1.14 m); 3.125 oz (87 g)

    In stock (can be backordered)

    SKU: VCAN-DW3.
    Categories: , .

    Description

    Dual Channel Isolated Dual Wire CAN to USB interface

    Field Tested: 1000s sold worldwide!

    ValueCAN3 delivers value by being a simple, low cost, high performance, and high quality tool for connecting your PC to a Controller Area Network (CAN) bus. It has become a low cost standard for many large corporations including automotive, military, industrial networking, and heavy commercial vehicle OEMs and their suppliers. ValueCAN3 has proven itself in a wide range of applications and environments.

    Quality is what you expect and deserve

    ValueCAN3 was designed as a high quality CAN tool solution. ValueCAN3 is fully isolated from the PC and includes certified drivers for Windows XP / Vista / 7 / 8.X / 10 and Linux. ValueCAN3’s isolation layer is self powered from USB which eliminates the need for external power for the CAN transceiver.

    ValueCAN3’s isolation, a feature not common on low cost interfaces, resolves issues with grounding or noise affecting your PC and its communications. ValueCAN3 is also electrically hardened to survive an abusive environment including reverse battery and electrical transients. To make wiring easy, the device pin-out is printed clearly on the housing. Finally, ValueCAN3 is backed by a 1 year warranty.

    ValueCAN 3 Block Diagram

    ValueCAN3 block diagram shows electrical isolation powered from USB

    High Performance

    Are you running your networks at 1 Mbit per second with a high utilization rate? If you are, you can count on ValueCAN3. ValueCAN3 has been tested and verified to operate on high bandwidth CAN networks. This includes 100% utilization at 1Mbit on both channels. This performance is enabled by including a large 1 megabyte buffer on the device.

    Real Time Acceleration

    ValueCAN3 has the ability to load real time scripts created with Vehicle Spy Professional. These scripts then execute in real time at microsecond resolution. The scripts can be controlled and monitored with a PC application.

    High Level Protocols Supported

    J1939, OBD2 on CAN, Keyword Protocol over CAN, UDS diagnostics, DeviceNet, and CANOpen are all compatible with ValueCAN. We offer cables for J1939 and automotive diagnostics on CAN Bus.

    Software Support: Turn-Key

    A copy of Vehicle Spy 3 Trial Edition is included with ValueCAN3. This program is a powerful vehicle bus analyzer for monitoring messages and configuring baud rates. The professional user will want to upgrade to the full Vehicle Spy 3 Software. Vehicle Spy lets you filter traffic, decode message data, build scripts, simulate other nodes, and build graphical displays of your data.

     

    Vehicle Spy 3
    ValueCAN 3 includes Vehicle Spy trial edition for monitoring and saving CAN traffic.

    Software Support: Create Your Application Using the Included Intrepid DLL API, J2534 API, or RP1210 API

    For those who wish to write their own applications, ValueCAN3 includes a DLL and helpful examples for Visual C++, Borland C++ Builder, LabWindows CVI, LabVIEW, Delphi, Excel, and Visual Basic. For more information on the DLL (ValueCAN uses the neoVI DLL).

    ValueCAN Pins

    Pin Description
    1 Trigger Pin
    2 CAN1 Low
    3 GND
    4 CAN2 Low
    5 GND (Shield)
    6 GND
    7 CAN1 High
    8 CAN2 High
    9 V+

     

    Additional information

    Weight 0.1 lbs

    Reviews

    There are no reviews yet.

    Be the first to review “ValueCAN 3 (2x Dual Wire CAN [ISO 11898-3])”

    Your email address will not be published. Required fields are marked *

    Anal